产品概述
The TXS0108ERGYR is a 8-bit Bidirectional Voltage-level Shifter for open-drain and push-pull applICations. This non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA and accepts any supply voltage from 1.65 to 3.6V. VCCA must be less than or equal to VCCB. The B port is designed to track VCCB and accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.2, 1.5, 1.8, 2.5, 3.3 and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. The TXS0104E is designed so that the OE input circuit is supplied by VCCA. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor. The minimum value of the resistor is determined by the current-sourcing capability of the driver.
No direction-control signal needed
Maximum data rates (60Mbps (push pull), 2Mbps (open drain))
1.2 to 3.6V on A port and 1.65 to 5.5V on B port (VCCA <= VCCB)
No power-supply sequencing required, either VCCA or VCCB can be ramped first
Latch-up performance exceeds 100mA per JESD 78, class II
Green product and no Sb/Br
应用
通信与网络, 便携式器材, 消费电子产品, 计算机和计算机周边
产品信息
输入数: 8 输出电流: - 传播延迟时间: 4.8ns 针脚数: 20引脚 封装类型: VQFN 电源电压最小值: 1.2V 电源电压最大值: 5.5V 工作温度最小值: -40°C 工作温度最高值: 85°C 逻辑类型: 电压电平转换器 产品范围: - 汽车质量标准: - MSL: MSL 2 - 1年
免责声明： 以上所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责。买卖IC网对此不承担任何保证责任。
以上是，TXS0108ERGYR正品保障公司现货量大从优，品牌:TI 型号:TXS0108ERGYR的信息