产品概述
The SN65HVD485EDG4 is a half-duplex Transceiver designed for RS-485 data bus networks. Powered by a 5V supply, it is fully compliant with the TIA/EIA-485A standard. This devICe is suitable for data transmission up to 10Mbps over long twisted-pair cables and is designed to operate with very low supply current, typically less than 2mA, exclusive of the load. When the device is in the in-active shutdown mode, the supply current drops below 1mA. The wide common-mode range and high ESD protection levels of this device make it suitable for demanding applications such as: electrical inverters, status/command signals across telecom racks, cabLED chassis interconnects and industrial automation networks where noise tolerance is essential. Power-on reset circuits keep the outputs in a high-impedance state until the supply voltage has stabilized. A thermal-shutdown function protects the device from damage due to system-fault conditions.
Bus-open-failsafe receiver
Glitch-free power-up and power-down bus inputs and outputs
Meets or exceeds the requirements of the TIA/EIA-485A standard
Industry-standard SN75176 footprint
Bus-pin ESD protection up to 15kV
1/2 Unit-load (up to 64 nodes on the bus)
Green product and no Sb/Br
应用
电机驱动与控制, 自动化与过程控制, 建筑自动化, 电源管理, 通信与网络, 工业
警告
该设备内置静电防护措施有限, 存放时引线应短接在一起, 或将设备放置在导电泡沫中, 以防止静电对MOS门造成损坏.
产品信息
器件类型: RS485 收发器 芯片接口类型: - 驱动器数: 1驱动器 接收器数: 1Receivers 电源电压最小值: 4.5V 电源电压最大值: 5.5V 驱动器封装类型: SOIC 针脚数: 8引脚 工作温度最小值: -40°C 工作温度最高值: 85°C 产品范围: - 汽车质量标准: - MSL: MSL 1 -无限制
免责声明： 以上所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责。买卖IC网对此不承担任何保证责任。
以上是，SN65HVD485EDG4正品保障公司现货量大从优SN65HVD485EDG4，品牌:TI 型号:SN65HVD485EDG4的信息